centrifugal pump

Study on computer aided interaction design for diffuser of centrifugal pump

离心泵扩散管计算机辅助交互设计方法研究

It is self-priming centrifugal pump performance curve of the fundamental.

它是自吸离心泵的基本的性能曲线.

The theoretical analysis of boundary layer in vane of centrifugal two-phase flow pump may provide a basis for flow drag in vane surface and a theoretical evidence to determine vane curve.

离心式固液两相流泵叶片的边界层的理论分析，可以为分析流体在叶片表面沿程阻力提供基础，进一步也可以为确定叶片型线提供理论依据。

Self-suction centrifugal pump, solid all-in-one structure, and durable.

自吸式离心泵, 坚固的 一体式 结构, 经久耐用.

Single suction, single stage horizontal centrifugal pump with closed impeller.

单吸 、 单级卧式离心泵,用封闭叶轮.

The whole centrifugal pump system, including leading-in conduits, blades, pump housing, and discharging tube, was calculated using the multi-reference coordinate and standard k-ε turbulent model.

选用多重参考坐标系及标准k-ε湍流模型，计算对包括导入管、叶轮、泵壳及出水管在内的整个离心泵系统。

It is not only used to design centrifugal pump impeller and diffuser, but also used to design non_clogging pump impeller and diffuser, radial diffuser, space diffuser, etc.

它除了可进行清水泵的叶轮、蜗壳水力设计外，还可设计无堵塞泵的叶轮、蜗壳以及径向导叶、空间导叶等水力件的水力设计。

It is particularly suitable to the marine centrifugal pump.

特别适合船用离心泵配套使用.

Health stainless steel centrifugal pump, cam rotor pump, a return pump, Self-suction pumps.

不锈钢卫生离心泵 、 凸轮转子泵 、 回程泵 、 自吸泵.

Self-priming centrifugal pump over-current components are: inhalation room, impeller, the chamber pressure is in three parts.

自吸离心泵的过 流部件 有: 吸入室, 叶轮, 压出室三个部分.

Research of mathematics model of the general center line of axial section flow channel of centrifugal pump

离心泵通用轴面流道中线的数学模型研究

The curve and surface of the bend-shaped diffuser of centrifugal pump are structured by NURBS ( Non-Uniform Rational B-Spline) method in the design process.

论述了采用非均匀有理B样条（NURBS）方法，在离心泵弯曲形扩散管设计过程中构造曲线和曲面；

Hydrostatic bearing can solve the equilibrium problem of axial force of multistage centrifugal pump satisfactorily.

液体静压支承技术可以很好地解决多级离心泵轴向力的平衡问题.

The improvement of Multiple centrifugal pump sealing protection ring for ammonia production was introduced.

介绍了合成氨生产中多级离心式打水泵密封保护环的改造.

ApplicationModel 32 PL shower pump is a horizontal centrifugal pump of single-stage , and single-suction overhang type.

32PL型喷淋泵系 单级 单吸卧式悬臂离心泵.

The property test of centrifugal pump through computer is introduced.

介绍了离心泵计算机辅助试验系统的设计及试验结果。该系统利用计算机对离心泵进行性能试验。

Study on CAD of Bend-Shaped Diffuser of Centrifugal Pump Based on NURBS

基于NURBS的离心泵弯曲形扩散管的cad研究

The characteristics of centrifugal pump unit given by pump specimen are obtained by testing with water.

泵样本上给出的离心泵组的特性都是用水试验得出的.

Based the brake horsepower characteristics of low specific speed centrifugal pump and the required features of pumps used for agriculture, the concept of non-overload centrifugal pumps is conceived.

针对农用泵（运行工况多变且出口无流量调节阀）的特点和低比转速离心泵的轴功率在大流量区运行易过载的特性，提出了无过载离心泵的概念。

Fourth , the centrifugal pump Here are a few important performance curve.

下面介绍离心泵的几条重要的性能曲线.

Model 150 PSA Sand Pump is a horizontal centrifugal pump of single-stage and end-suction overhang type.

150PSA型砂泵为卧式端吸单级悬臂式离心泵.

Leaf-centrifugal pump is a typical fluid machinery products.

离心泵是叶片式流体机械的典型产品.

Fire works a pet project of the centrifugal pump will not be disadvantaged natural!

工程火,做为工程项目宠儿的离心泵自然就不会受冷落!

Theoretical pressure head and performance curves of submersible electric centrifugal pump for gas-liquid mixture

电动潜油离心泵输送气液两相介质的理论压头和理论特性曲线

Based on Navier-Stokes equation and k-ε turbulence model, the flow field of centrifugal pump is calculated.

采用基于时均Navier-Stokes方程和标准k-ε紊流模型对得到的离心泵进行流场计算，并根据计算结果，对离心泵内部流场进行了分析；

Centrifugal pump in the assembly must be well prepared.

离心泵在装配前,必须做好准备工作.

Research on Computer Aided Test of Centrifugal Pump System

离心泵计算机辅助性能试验系统的研究

YHB series chemical submersible pump is vertical single stage single-suction centrifugal pump.

YHB系列化工液下泵是立式单级单吸离心泵.

Centrifugal pump impeller in general many such.

一般的离心泵叶轮多为此类.

The Calculation and Analysis of Multistage Diffuser in Centrifugal Pump Using CFD

多级导叶式离心泵导叶内部CFD计算分析